Important Notice for Our Valued Customers

While many small wind turbines are widely offered on the market, some are advertised with unrealistic power ratings of 3000–4000 Watts—often at extremely low prices. Please be aware that such claims do not reflect actual performance under real-world wind conditions.

To avoid disappointment, we strongly advise you to carefully review the product specifications and ensure that the system you are considering truly meets your energy needs. Making an informed and responsible choice is essential for investing in a reliable, efficient, and long-lasting wind power solution.

3-blade turbine: If your average wind speed is consistently above 6–7 m/s, it is generally more efficient because it spins more easily in strong winds and produces more energy. 3 blades = better for normal or strong winds (higher power output)

5-blade turbine: If the wind is weak and irregular (e.g. below 5 m/s), it starts turning earlier, which is an advantage. However, it creates more resistance at higher wind speeds. 5 blades = better for low and steady weak winds, but less efficient in strong winds

You can see performance chart of wind turbine here -->

You can see manual book of wind turbine here -->

You can see mast shaft connection flange technical drawing here -->

You can see technical drawing of Mast Set here -->

You can see manual book of charge controller here -->

FOR 5 BLADE VERSION IS RECOMMEND ONLY FOR LOW WIND AREAS 

• Universal application for low, middle and high wind
  
• 3-phase permanent magnets (High efficiency due to strong permanent magnets (NdFeB magnets, 150 ° temperature resistant)
• Aerodynamic design
• Powder coated aluminum housing
• Low noise
• UV-resistant Plastic + 30% glass fibers blades, successfully tested
• Power transmission through slip ring, thereby no twisting of the cable possible
• Durable and low maintenance

2000W 24V Pro Wind Charge Controller

This controller settings can not change by user. It has factory settings.

PREPARING TIME CAN BE EXTRA ABOUT 1 WEEK 

DUMP LOAD MUST BE PLACE IN HORIZONTAL , OTWERWISE IT DOESN'T WORK EFFICIENT

4 meters IstaBreeze TOWER for wind generator i700 - i2000 (Windsafe Models need adapter for it), IstaBreeze or wind generators up to 40 KG It has never been so easy to install a wind generator. With the IstaBreeze Tower it is possible to build a wind generator in a few minutes. The folding system simplifies the whole process. During maintenance, only a few screws are released and the tower can be folded for maintenance. Dowels and screws for the floor (concrete floor) is still needed !! Thanks to the specially designed galvanized stainless steel tensioned pole, the installation of wind turbines is now very easy. Thanks to its hinged system, one person can easily install it and easily remove the turbine whenever they want. The pole set consists of four one-meter pipes, a hinged lower phalanx, three steel ropes and nine tensioning devices. It can also be extended up to a maximum of 10 meters by adding one-meter additional pipes upon request.

Note:

Carbon rotor blades are stable, do not bend in strong winds, and can increase the performance of your wind turbines by up to 30%. The carbon set is available as an option.

Important:

Five rotor blades are ideal for wind regions with low average wind speeds. We recommend these for slightly windy areas. Please note that there may be a performance loss of up to 35% compared to the maximum output.